It happens sooner or later. You posted what you thought was an honest and candid comment about someone or something. The next thing you know, you're getting high-pitched emails from someone (not even necessarily mentioned in your comment) who's threatening all sorts of lawsuits against you. Or, even scarier, you made a negative comment about a company's product or service, and a few days later you received an email from some law firm demanding that you delete your post, make a public apology, and give them your domain (possibly with a certain amount of dollars for their time and trouble) - or you face expulsion, a bad haircut, complete destruction of everything you hold dear in your life, and permanent cancellation of your city library card.
What should I do? What should I do?
Attorney Ken White (chief ogre at Popehat) has published a very good article on how to behave - and what to do (and more importantly not to do) if you ever get a threat that someone is going to file a "libel" or "libel" lawsuit for what you (presumably) said or posted on the Internet.
The link to the article is here. Ken asked for "no scraping" from his site. But I think I can quote one brief excerpt from his much longer article, which I recommend reading in full.
thanks a lot for this thread
the topic is very important
FAMILY COURT WITHOUT ATTORNEY. Already at this time, I advise you to urgently find a lawyer, as you may be given a fictitious lawyer or a lawyer with a short service life. The state is now making money on this, and not very small ones. I advise you to simply find yourself a lawyer as soon as possible, as in the future everything may end very badly. At the moment, everyone is trying to win as much money as possible on this. I personally use one site to find myself a lawyer. This site often helped me in the courtroom as it found the right lawyer at the right time. Try this site https://www.minclaw.com/california-defamation-law-state-guide/
Click here for more details about 23172K.MB FAG.
After shaft seizure occurs, the reasons can be found from several aspects:
①Whether there is oil leakage in the grinding head.
②Whether the oil pool is short of oil, and whether the oil level is lower than the indicator line on the oil mark. There is a kind of flat grinding lubricating oil which is prepared with kerosene, which is volatile. When the grinder is in normal use, the operator should always pay attention to the oil mark. When the lubricating oil in the grinding head is lower than the indicator line on the oil mark, add lubricating oil in time.
③ Before assembling the grinding head, the grinder manufacturer must check the ovality of the inner hole of the oil ring (ovality≤0.05mm) and whether the 16 5mm holes on the oil ring are evenly distributed. The oil ring is sleeved on the main shaft, the inner circle of the oil ring is close to the outer circle of the main shaft, and the lower end of the oil ring is placed under the oil surface. When the main shaft rotates, the oil ring is driven to rotate synchronously by static friction. When the ellipse of the inner hole of the oil ring is too large, the contact surface between the main shaft and the oil ring will be large and small, or even not in contact, so the friction force will be large and small, or even without friction, causing the oil ring to rotate quickly and slowly , The oil supply is normal and abnormal momentarily and the shaft is hung.
(3) The lubricating oil of the grinding head sliding bearing does not meet the specified requirements. There are two types of lubricating oil for flat grinding heads: one is N7/GB3141 machine oil, and the other is 1 part of N23 machine oil and 9 parts of kerosene. Some users purchase new flat grinders and directly inject other types of mechanical oil without reading the instruction manual, which causes the shaft to lock.
(4) The radial clearance between the main shaft and the sliding bearing is too small, the lubricating oil is not easy to input, and the temperature rise between the main shaft and the sliding bearing is too high, resulting in the shaft holding.
(5) The scraping method of the sliding bearing is incorrect, and the contact point does not meet the requirements. Incorrect scraping method of sliding bearing, uneven contact points or too few contact points will make the bearing oil film unstable and poor oil film rigidity. If the grinding wheel is being ground, it is easy to cause shaft holding.
The coaxiality of the rear bearing seat and the grinding head body and the perpendicularity of the end surface, as well as the deviation of the parallelism of the outer spacer between the two rolling bearings, and the inner spacer are too large. When this happens, the front end of the spindle, that is, the cone of the spindle contacting the grinding wheel chuck, has a relatively large runout. When the spindle is rotating, the runout and position of the spindle cone are extremely unstable and fluctuate. In fact, this is a superficial phenomenon, which reflects that the spindle axis is drifting and unstable, which leads to unstable bearing oil film and poor oil film rigidity. If the grinding wheel is grinding, it is very easy to produce shaft holding.
(7) The vertical feed is too large, and the cutting is overloaded. At this time, the speed of the grinding wheel decreases, the rigidity of the bearing oil film decreases, and non-liquid friction is formed between the main shaft and the sliding bearing, which eventually causes the shaft to hold. There are many factors for flat grinding heads to hold the shaft. When looking for the cause of the shaft, you must not grasp the point and eliminate the fault from multiple perspectives and all-round.
Click here for more details about 23172K.MB FAG.
After shaft seizure occurs, the reasons can be found from several aspects:
①Whether there is oil leakage in the grinding head.
②Whether the oil pool is short of oil, and whether the oil level is lower than the indicator line on the oil mark. There is a kind of flat grinding lubricating oil which is prepared with kerosene, which is volatile. When the grinder is in normal use, the operator should always pay attention to the oil mark. When the lubricating oil in the grinding head is lower than the indicator line on the oil mark, add lubricating oil in time.
③ Before assembling the grinding head, the grinder manufacturer must check the ovality of the inner hole of the oil ring (ovality≤0.05mm) and whether the 16 5mm holes on the oil ring are evenly distributed. The oil ring is sleeved on the main shaft, the inner circle of the oil ring is close to the outer circle of the main shaft, and the lower end of the oil ring is placed under the oil surface. When the main shaft rotates, the oil ring is driven to rotate synchronously by static friction. When the ellipse of the inner hole of the oil ring is too large, the contact surface between the main shaft and the oil ring will be large and small, or even not in contact, so the friction force will be large and small, or even without friction, causing the oil ring to rotate quickly and slowly , The oil supply is normal and abnormal momentarily and the shaft is hung.
(3) The lubricating oil of the grinding head sliding bearing does not meet the specified requirements. There are two types of lubricating oil for flat grinding heads: one is N7/GB3141 machine oil, and the other is 1 part of N23 machine oil and 9 parts of kerosene. Some users purchase new flat grinders and directly inject other types of mechanical oil without reading the instruction manual, which causes the shaft to lock.
(4) The radial clearance between the main shaft and the sliding bearing is too small, the lubricating oil is not easy to input, and the temperature rise between the main shaft and the sliding bearing is too high, resulting in the shaft holding.
(5) The scraping method of the sliding bearing is incorrect, and the contact point does not meet the requirements. Incorrect scraping method of sliding bearing, uneven contact points or too few contact points will make the bearing oil film unstable and poor oil film rigidity. If the grinding wheel is being ground, it is easy to cause shaft holding.
The coaxiality of the rear bearing seat and the grinding head body and the perpendicularity of the end surface, as well as the deviation of the parallelism of the outer spacer between the two rolling bearings, and the inner spacer are too large. When this happens, the front end of the spindle, that is, the cone of the spindle contacting the grinding wheel chuck, has a relatively large runout. When the spindle is rotating, the runout and position of the spindle cone are extremely unstable and fluctuate. In fact, this is a superficial phenomenon, which reflects that the spindle axis is drifting and unstable, which leads to unstable bearing oil film and poor oil film rigidity. If the grinding wheel is grinding, it is very easy to produce shaft holding.
(7) The vertical feed is too large, and the cutting is overloaded. At this time, the speed of the grinding wheel decreases, the rigidity of the bearing oil film decreases, and non-liquid friction is formed between the main shaft and the sliding bearing, which eventually causes the shaft to hold. There are many factors for flat grinding heads to hold the shaft. When looking for the cause of the shaft, you must not grasp the point and eliminate the fault from multiple perspectives and all-round.
Approval folks, you're doing a truly great job.
All kind infromation visit here
We provide a wide range of services for each customer that assist them in selecting the best options for their individual residences. We don't think it's enough to just sell the goods. Our company is built on providing excellent customer service. 11,000 square feet of shop space dedicated to high-end, luxurious fixtures chosen for both business and residential uses.
Indian Medical System will continue to position itself as a manufacturer & exporter of choice for its valuable customer by offering high quality, cost effective supplies. IMS will achieve this by adopting customer oriented policies, hence no compromise in offering a quality product to serve the mankind as we belive "Human Life is Precious".
visit here
There is need for excellent content and any bad comment comment can be removed through internet defamation removal
buy diazepam online
ritalin buy
lsd blotters
buy tramadol online
Buy Noopept
Buy Bacopa Monnieri
Buy Creatine
Buy L-Theanine
Buy L-Theanine
L-Theanine buy
buy l-theanine
buy theanine
Buy L-Theanine
L-Theanine buy
buy l-theanine
buy theanine
Buy Creatine
best creatine to buy
nutrabay creatine
creatine supplement price
Buy Creatine
best creatine to buy
nutrabay creatine
creatine supplement price
Buy Bacopa Monnieri
bacopa monnieri order
buy bacopa
bacopa monnieri buy online
Buy Bacopa Monnieri
bacopa monnieri order
buy bacopa
bacopa monnieri buy online
Buy Noopept
noopept online
noopept buy online
noopept for sale
Buy Noopept
noopept online
noopept buy online
noopept for sale
ritalin buy
buy ritlain online 10mg for sale
buy ritaline online
ritalin for sale
ritalin buy
buy ritlain online 10mg for sale
buy ritaline online
ritalin for sale