Welcome to Botox-dermalfillers , wholesale suppliers of branded fine fragrance, dermal fillers, botulinum toxins, cosmetics, skincare . We are proud to be able to bring you our wide selection of products and we pride ourselves on our professional, honest approach with both suppliers and customers alike and believe in working together to achieve long term growth and relationships. With our expertise, we can supply the right products and services for you at a competitive price. With us you get the best of the looks you want. Our products are all original direct from allergen Laboratories. Over the years we have built a wide and strong customer base all due to trust and quality products .
Contact us: Phone: +(38) 073 011 6411
Webmail: info@botox-dermalfillers.com
Before any machine is used, it needs comprehensive maintenance. The maintenance of roller crushers is the same, because it can not only save costs but also extend its life. Simple operation of the roller crusher and maintenance of the roller crusher during use are of vital importance. The working surface of the roller depends on the use requirements, and can be smooth or toothed or grooved. If it is broken harder and abrasive material, smooth roller can be used. Because the smooth surface roller's crushing effect is mainly crushing and grinding, it is mainly suitable for medium and fine crushing of medium hard materials. Before the Silica Sand Crusher Line In German is put into trial operation, the specific operation plan is: 1. Idling test of equipment: According to the practice, before the crushing machine is officially put into use, it must be run for more than 2 hours. The bearing temperature should be observed during operation, and it should be less than 30 degrees when it is in good condition. Then observe the sprocket. The rotation of the reducer, V-belt and rollers should be noiseless and the rotation frequency should be smooth and orderly. 2. Load test of the equipment: The load test of the equipment should be carried out after the items checked during dry running are normal. According to the regulations, the load test time of the equipment should be more than 8 hours. Roller crusher plant map The main purpose of this experiment is to determine whether the actual output particle size and output meet the requirements, whether it can meet the pre-production standards, and that during the production process, the temperature rise of the bearing is below 35 ° C. The work of each part of the crusher should be smooth and orderly. Noise or severe vibration, and the bearing lubrication system is good, no oil leakage or other abnormal conditions occur.