Many of the printer cleanser cartridge problems are due to problems with the drum unit. This is because the cylinder unit has a wiper blade that removes excess toner from the cylinder surface, the paper and from the transmission belt. Besides, when the cylinder unit is not in good complaint, it causes print class issues. Usually, low-quality toner cartridges can lead to problems due to deficient industrial quality and can be avoided by buying only honest products. Even if you use only honest products, your printer might come across tsgpc help fix Toner cartridge difficulties and some of these are clarified below.

Drum Failure Issues

Dots That Repeat Evenly Down The Page:  This is due to the attendance of a chip on the cylinder plate called “pinhole” and the distance between the dots is directly relative to the cylinder’s border. In some cases, the pinhole gathers foreign physical and it can be impassive with Isopropyl whiskey and a cord bud.

Thin And Straight Vertical Lines Running The Length Of Paper: This is due to a scrape on the surface of the drum from a distant particle or toner build-up on the wiper blade. This cuts a ring on the cylinder surface during its rotation, resulting in straight and thin plumb lines along the full length of the paper.

Toner Smears On The Page That Are Equidistant Vertically: This is due to minor wrong on the cylinder surface and is dependent on the drum’s border. It usually happens when the cylinder is straight exposed to sunshine for long time periods.

Dots Repeating Evenly Down The Page Along With Horizontal Band Across The Page: The spots are due to pinhole and the band across page shows a short against Primary Cost Roller (PCR) by the pin hole.

Equally Spaced Thin Lines: When this happens measure the cylinder circumference and if it is the same as the remoteness between the lines on paper, then it is produced by the wiper blades. This happens when the wiper blade coats the cylinder surface when resting on its surface for long times of time.