Forums » Introduce Yourself

Factors affecting particle size of spring cone crusher

    • 121 posts
    January 6, 2020 8:41 PM EST

    Portable Impact Crusher Plant For Sale In Indonesia is widely used in mining, metallurgy, building materials and other industries. It is used to crush ore, slag, rock and other materials. Its particle size determines its working performance and its application scope. The factor analysis of machine discharge granularity has important practical significance. 1. Matching of eccentric parts When the spring cone crusher is running, the motor drives the eccentric shaft sleeve to rotate through the transmission component. The main shaft with a taper and integrated with the moving cone body is driven by the eccentric shaft sleeve and its shaft is wound around the crusher The center of the rack makes a conical movement to achieve the purpose of crushing materials. If the discharge opening of the cone crusher is adjusted to be smaller than the specified minimum discharge opening size, the phenomenon of collision between the moving cone liner and the fixed cone liner will occur during operation. In reality, there is a certain gap between the minimum discharge opening that the spring cone crusher can actually adjust and the theoretical minimum discharge opening. The reason is that the wear of the matching parts causes the gap to become larger, or due to improper installation, repair, and adjustment. To the error. 2. The unstable operation of the moving cone means that the spring cone crusher has a series of problems such as jumping, overturning, etc. in the spherical bearing during the operation of the spring cone crusher due to problems in the design, manufacture or installation and adjustment process. Abnormal movement. When the cone crusher does not operate normally and the moving cone jumps or overturns in the spherical bearing, the distance between the moving cone liner and the fixed cone liner does not gradually change from large to small and from small to large, but it suddenly changes. In this situation, on the one hand, the discharge opening cannot be adjusted to a normal small value. On the other hand, the crusher does not use 'rotary extrusion' but uses 'impact extrusion' to crush the material. The needle shape of the material will definitely increase. 3. The shape of the lining plate structure is reasonable. The shape of the lining plate of the spring cone crusher can obtain better discharge granularity. The determination of the ideal shape of the liner should be based on factors such as the hardness of the crushed material, the output of the product, and the shape of the liner after abrasion.