Forums » Introduce Yourself

Bomberg Bolt-68 BS47CHAPBA.052.3 American Eagle review

    • 2 posts
    July 12, 2019 2:54 AM EDT

    Bomberg Bolt-68 BS47CHAPBA.052.3 American Eagle Men fake watches uk

    Automatic mechanical bomberg watches , once appear, fault, may be a loose spring, most likely is the insufficient activity is likely to be worn, arm swing is less, now that is automatic mechanical watches, without its movement, to generate enough power to make its needle rotation, below to see the full automatic mechanical watch lockout together? How to diagnose automatic mechanical watch shutdown fault?
    In today's society, people sit to work more, drive more cars, pedestrians less, hand winding (string) has become a necessity with automatic watch, otherwise it will lead to watch travel time length is not enough, often stop and travel time accuracy is poor. To know that automatic watches are not as absolute as you think and understand. So it's better to call an automatic watch; Arm swing auxiliary spring winding device, perhaps this is more appropriate.

    Automatic mechanical watch stop failure
    A stop-motion fault is when a best replica watches uk is wound up and still does not move when it is shaken or tapped. Watch stop is a common fault in the mechanical table, generally this kind of situation is in the watch collision or fall phenomenon, make the pointer appeared offset, pointer is not in the horizontal position, and the table more or less collision friction will appear stop fault.

    Experts point out that when the automatic mechanical watch prime mover mechanism to take these measures in order to prevent the wound up after the automatic mechanism is still on the form of overload and damage to the parts. Spring up to a certain extent appear slip, which can ensure the spring should output torque, and does not hinder the automatic mechanism of continuous work. In the hands of the automatic watch without a mechanism, you can use the table driver into the large steel wheel screw screw, rotation to make the spring tight, such as still observe and feel.

    The hand watch stop fault hands out of the problem is generally the second hand and watch glass encounter, second hand and minute hand encounter and hour hand and the trademark on the dial encounter these three reasons. In the second hand is not on the horizontal surface or installed too high, glass deformation, second hand tube and second tooth loose, in the main splint center hole wear makes the center tooth shaft and second tooth shaft concentricity decreases and so on these conditions will lead to the second hand and table glass collision. The minute hand is not on the horizontal level, the coat is too low, and the head is turned up during the assembly can cause the second minute hand to collide. When the gap between the hour hand and the dial is too small, the trademark design fake mens watches is too high, which will lead to the collision and friction between the hour hand and the dial trademark. These causes of the phenomenon will cause the watch to stop.

    Automatic mechanical watch fault diagnosis
    Before repairing the automatic mechanical watch should first determine whether the fault is in the former mechanism of automatic mechanical table, or in the automatic mechanical table itself, especially the prime mover structure and automatic structure. In the automatic watch with a hand mechanism, should first check the prime mover structure through the hand work is normal, in the process of positive rotation on the handle, if the observation of the pawl on the big steel wheel teeth bounce and feel ling char is being tightened by turns, that the prime mover structure is basically normal. When the spring is all tightened, although the spring in the box appeared slip also belongs to the normal range, because the spring of the automatic watch is different from the ordinary mechanism of the watch spring, it in the main spring and attached a pair of spring, some pair of spring has a hook on the inner wall of the replica swiss watches also open arc priest.