If you're noticing that your Bissell vacuum cleaner isn't picking up dirt and debris as efficiently as it used to, it may be time to replace the vacuum belt. A vacuum belt is an essential component of your vacuum cleaner that helps rotate the brush roll, which picks up dirt and debris from your floors. A worn-out or broken belt can cause the brush roll to stop rotating, making it difficult for your vacuum to clean properly. Get more details how to replace vacuum belt bissell
Replacing the vacuum belt on your Bissell vacuum cleaner is a simple process that can be done in just a few minutes. In this article, we'll guide you through the steps to replace the belt on your Bissell vacuum cleaner.
Before replacing the vacuum belt on your Bissell vacuum cleaner, make sure it's turned off and unplugged. This will ensure your safety while you work on the machine.
Next, you'll need to remove the bottom plate of your Bissell vacuum cleaner. Most Bissell models have a single screw or a few clips that hold the plate in place. Use a screwdriver or your fingers to remove the screw or unclip the plate and remove it.
Once you've removed the bottom plate, you should be able to see the brush roll and the old vacuum belt. Use your hands to remove the old belt from the brush roll and the motor shaft.
Now it's time to install the new vacuum belt. First, place the new belt onto the brush roll and make sure it's positioned correctly. Then, loop the other end of the belt onto the motor shaft.
Before replacing the bottom plate, check the tension of the new belt. The belt should be tight enough to rotate the brush roll, but not so tight that it's difficult to install. If the belt is too loose, adjust the tension by moving the brush roll back and forth until the belt is tight enough.
Once you're satisfied with the tension of the new belt, replace the bottom plate of your Bissell vacuum cleaner. Make sure it's securely in place and tighten any screws or clips.
Finally, plug in your vacuum cleaner and turn it on to make sure everything is working properly. You should be able to hear the brush roll rotating and feel the suction picking up dirt and debris.
Replacing the vacuum belt on your Bissell vacuum cleaner is a simple process that can be done at home. By following these easy steps, you can ensure that your vacuum cleaner is working at its best and picking up dirt and debris efficiently. Remember to replace your vacuum belt every six to twelve months, or as needed, to keep your vacuum cleaner in good working condition.