Recent Entries

• New Application and Basic Performance Requirements of TIMKEN Be

  by Bella Lv July 9, 2020
  The storage pits on the surface of the TIMKEN bearing are regularly arranged and filled with grease, especially for high-load low-speed rotation movements and swinging movements. A negative, fluid-lubricated opening and closing site is often not formed. Under boundary lubrication conditions, no oil ...

• SKF Bearing Oil Film Lubrication Replacement Steps

  by Bella Lv July 7, 2020
  The lubrication management of SKF bearing oil film is very important and cannot be ignored. The detailed introduction is as follows: More than half of the main causes of mechanical failure or early wear are related to lubrication technology management. FAG QJ310 bearing online.Improve lubrication ma...

• Noise Problems Caused by Improper Installation of SKF Bearings

  by Bella Lv July 6, 2020
  1. The assembly site must be kept clean. The operation and service life of SKF bearings are very important. It is necessary to prevent the bearings from being contaminated with dust, pollutants and moisture-contaminant pairs. FAG QJ219N2 bearing online2. Check the bearing seat hole and the matching ...

• FAG Electrically Insulated Bearings

  by Bella Lv July 6, 2020
  Overcurrent often occurs on wheelset bearings and traction motors (rail vehicles), DC and AC motors (power transmission systems), and generators (wind power). Overcurrent may cause damage to the raceway and rolling elements and the aging of the lubricant, causing premature failure of the motor or ge...

• Answers to Common Questions About INA Bearing Installation

  by Bella Lv July 5, 2020
  Question 1:How to choose grease?Lubrication has a very important effect on the operation and life of INA bearings. Here is a brief introduction to the general principles of grease selection. Lubricating grease is made of base oil, thickener and additives. The performance of different types and diffe...